V-rings are widely used as follows:
First, the application of V-ring:
The V-ring is mainly used for the special reciprocating seal of the piston rod and the piston of the hydraulic cylinder. There are two reasons for this:
1. Frictional resistance: The frictional resistance of the v-ring is also larger than that of the y-ring;
2. Performance: natural sealing performance is reliable;
3. Service life: Compared with other seals, the service life is longer (see actual situation).
Second, the working principle and working environment of the V-ring:
1. Working pressure: The maximum working pressure of the v-type seal can reach >60MPa (pressure unit).
2. Working temperature: v-type seals at room temperature operating temperature is -30 ~ +80 degrees Celsius (according to the actual situation).
Third, the working speed range of the V-ring:
NBR Rubber: The v-type seal developed by this type of material can work at speeds of 0.02-0.3M/s;
Rubber with fabric inside: V-type seals developed by this type of material can work at speeds of 0.005-0.5M/s